View SMT05E-12V_1089690.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
SMT05E-12V SERIES
0.8 Vin - 3.63 Vin Single output
5 A Current rating Input voltage range: 10.0 Vdc to 14.0 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 6,920,000 hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required industry standard surface-mount footprint Available RoHS compliant
THE SMT05E-12 series are non-isolated dc-dc converters packaged in a single-inline footprint giving designers a cost effective solution for conversion from a 12 V input to output voltages of 0.8 Vdc to 3.63 Vdc. The SMT05E-12 offers a wide output trim range, which allows maximum design flexibility and a pathway for future upgrades.
The SMT05E-12 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SMT05E-12 offers compact size and efficiencies of up to 91%
[ 2 YEAR WARRANTY ]
1
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5SXA10 Series Converters A DC-DC | 15W DC/DC E Class Non-Isolated
Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Input voltage - continuous Input voltage - peak/surge Operating temperature Symbol Vin (cont) Vsurge Top Tstorage Pout (max) Min -0.3 -0.3 -40 Typ 12 Max 14 14.5 100 Units V DC V DC C Notes and Conditions Vin(+) - Vin(-) 2s max, non-repetitive Measured at thermal reference points, see Note 1
Storage temperature Output power (3.3V)
-40 0
125 16.5
C W Output setpoint default is 0.8V. Trim up to 3.3V with external resistor between trim pin and ground. See Application Note 144 for details. Max output current is 5A across entire trim range.
All specifications are typical at nominal input Vin = 12V, full load under any resistive load combination at 25C unless otherwise stated.
Input Characteristics Characteristic Input voltage - operating Input current - no load Input current - quiescent Inrush current (i2t) Input ripple current Input fuse* Symbol Vin (oper) lin lin (off) linrush Min 10 Typ 12 40 7 0.1 200 3 Max 14 80 Units V DC mA DC mA DC A2s mA rms A Vin (min) - Vin (max), enabled Converter disabled Complies with ETS300 132 Part 4.7, with recommended LISN Slowblow/antisurge HRC recommended* *See Application Note 144 for manufacturer and part number Notes and Conditions
Turn On/Off Characteristic Input voltage - turn on Turn on delay - enabled, then power applied Symbol Vin (on) Tdelay (power) Min Typ Max 10 20 Units V DC msec Notes and Conditions
Turn on delay - power applied, then enabled
Tdelay (enable)
20
msec
With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band
Rise time
Trise
15
msec
From 10% to 90%; full resistive load, no external capacitance
2
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
Signal Electrical Interface Characteristic - Signal Name Symbol At remote/control ON/OFF pin Open collector or equivalent compatible Control pin open circuit voltage Vih High level input current Iih Min Typ Max Units Notes and Conditions See Notes 2 and 3 See Application Note 144 for Remote ON/OFF details Iih = 0 A; open circuit voltage Current flowing into control pin when pin is pulled high (max at Vih = 5.5V) Converter guaranteed ON when control pin is greater than Vih(min) or open cct. Acceptable leakage current from signal pin into the open collector driver (neg = from converter) Converter guaranteed OFF when control pin is less than Vil (max) volts. Vil = < 0.4 V
0 1
V mA
High level input voltage
Vih
1.6
Vin
Acceptable high level leakage current Low level input voltage
Iih (leakage)
-10
A
ViI
0.8
V
Low level input current
IiI
20
A
Reliability and Service Life Characteristic Mean time between failure Symbol MTBF Min Typ 482,000 Max Units Hours Notes and Conditions MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25C; ground benign environment Telcordia SR-332 Demonstrated. This entry will be periodically updated as the number of test hours increase
Mean time between failure Mean time between failure
MTBF MTBF TBA
6,920,000
Hours Hours
3
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5SXA10 Series Converters A DC-DC | 15W DC/DC E Class Non-Isolated
Other Specifications
Characteristic Switching frequency Weight Coplanarity Symbol Fsw Min Typ 330 3 100 Max Units kHz g m Measured from seating plane Notes and Conditions Fixed frequency
Environmental Specifications
Characteristic Thermal performance Symbol Min -40 Typ Max 100 Units C Notes and Conditions See Note 5 and individual derating curves
EMC Electromagnetic Compatibility
Phenomenon Immunity: Conducted immunity Radiated immunity ESD Enclosure EN61000-4-6 EN61000-4-3 EN61000-4-2 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Port Standard Test level Criteria Notes and conditions
Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage. RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test. LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test. Unit will self recover to normal performance after test. Referenced ETSI standards: ETS 300 386-1 table 5 (1997): Public telecommunication network equipment, EMC requirements ETS 300 132-2 (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions
4
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
Safety Agency Approvals
Standard UL/cUL CSA 22.2 UL60950 TUV Product Service EN60950 Category File No. E174104 Certificate No. B 02 12 382 72 035
Material Ratings
Characteristic Flammability rating Notes and Conditions UL94V-0
Model Numbers
Model Number SMT05E-12W3V3J Input Voltage Output Voltage Output Current (Max.) 5A Typical Efficiency 91% @ full load Max. Load Regulation 1.0%
10.0 - 14.0VDC 0.8V - 3.63V
RoHS Compliance Ordering Information The `J' at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details.
5
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5SXA10 Series Converters A DC-DC | 15W DC/DC E Class Non-Isolated
W3V3 Model Input Characteristics
Characteristic Input current - operating Symbol Iin Iin (ripple) Cinput Cbypass 10 Min Typ 1.5 Max 1.6 Units A DC Notes and Conditions Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Iout = Iout (max.), measured without external filter Internal to converter
Reflected ripple current
200
mA rms
Input capacitance internal filter Input capacitance external bypass
9.4
F
F
Recommended customer added capacitance may be required on source impedance on customers applications
W3V3 Model Electrical Characteristics - O/P
Characteristic Nominal set-point voltage Total regulation band Symbol Vo (nom) Vo Min 0.785 Typ 0.8 3 Max 0.815 Units V DC % Notes and Conditions Vin = Vin (nom); Iout = Iout (nom) For all line, static load and temperature until end of life Iout = Iout (nom); Vin (min) to Vin (max) Vin = Vin (nom); Iout (min) to Iout (max)
Line regulation
1
%
Load regulation
1
%
Output current continuous Output current - short circuit
Iout Isc Vp-p Vrms
0 2
5 4
A DC A rms Continuous, unit auto recovers from short, Vo < 100mV
Output voltage - noise
60 25
mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 144 for measurement set-up details
6
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
W3V3 Model Electrical Characteristics - O/P
Characteristic Load transient response peak deviation Symbol Vdynamic Min Typ 50 Max Units mV Notes and Conditions Peak deviation for 50% to 75% step load, di/dt = 100 mA/sec. Measurement taken with no external capacitors Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors
Load transient response recovery
Trecovery
50
sec
External load capacitance
Cext
10,000
F
W3V3 Model Protection and Control Features
Characteristic Allowable output voltage Symbol Min 0.8 Typ Max 3.63 Units V Notes and Conditions Trim up. Note that the maximum output power is still 16.5W. De-rate the maximum output current accordingly
W3V3 Model Efficiency
Characteristic Efficiency Symbol Min 89 Typ 90 Max Units % Notes and Conditions Iout = 100% Iout (max), Vin = Vin (nom) Iout = 50% Iout (max), Vin = Vin (nom)
Efficiency
90
91
%
7
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5SXA10 Series Converters A DC-DC | 15W DC/DC E Class Non-Isolated
W3V3 Model
RATED OUTPUT POWER (%)
93 100 80 60 40 20 0 20 40 60 80 100
0 m/s (0 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM)
EFFICIENCY (%)
91 89 87 85 0 1 2 3 4 5
Vin = 10.0V Vin = 12.0V Vin = 14.0V
AMBIENT TEMPERATURE (C)
Figure 1: Derating Curve with Vin = 12V and No Trim (Vout = 0.8V)
OUTPUT CURRENT (A)
Figure 2: Efficiency vs Load
Figure 3: Short Circuit Characteristic (Channel 4: Is/c)
Figure 4: Typical Transient Response 50% - 75% Step Load Change (Channel 2: Vo, Channel 4: Io)
Figure 5: Typical Transient Response 75% - 50% Step Load Change (Channel 2: Vo, Channel 4: Io)
Figure 6: Typical Power-up Characteristic (Channel 1: Vin, Channel 2: Vo)
8
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
W3V3 Model
Figure 7: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF)
Figure 8: Typical Ripple and Noise, Vin = 12V, Vout = 3V3 and Iout = 10A (Channel 2: Vo)
9
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5SXA10 Series Converters A DC-DC | 15W DC/DC E Class Non-Isolated
TOP VIEW
0.190 (4.83)
0.160 (4.06)
0.160 (4.06)
0.180 (4.57)
0.340 (8.64)
0.450 (11.43)
4
3
2
0.350 (8.90)
5 BOTTOM VIEW
1
SIDE VIEW
0.235 (5.97)
0.062 (1.57)
Seating Plane
All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
Connector (5PL) Width :0.090 (2.29) Length: 0.062 (1.57)
Pin Connections
Pin No. 1 2 3 4 5 Function Remote ON/OFF Vout Trim Ground Vin
Figure 9: Mechanical Drawing and Pinout Table
10
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
0.060 (1.52)
0.800 (20.32)
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
Note 1
Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points.
Note 2
The Remote ON/OFF pin is referenced to ground.
Note 3
The SMT05E-12 features an `Active High' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Remote pin open circuit Remote pin pulled low [Von/off <.8V] Remote pin pulled high [Von/off >1.6V] Converter Operation Unit is ON Unit is OFF Unit is ON
An `Active Low' Remote ON/OFF version is also possible with this converter. Please consult the factory for details.
Note 4
Thermal reference set up: Unit mounted on an edge card test board 203mm x 190mm. Test board mounted vertically. For test details and recommended set-up see Application Note 144.
Note 5
Max 60C for full load in still air. See Application Note 144 for a detailed thermal derating. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals.
11
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005
SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated
NORTH AMERICA
e-mail: sales.us@artesyn.com
800 769 7274 + 508 628 5600
EUROPEAN LOCATIONS
e-mail: sales.europe@artesyn.com
IRELAND + 353 24 93130 AUSTRIA + 43 1 80150
FAR EAST LOCATIONS
e-mail: sales.asia@artesyn.com
HONG KONG + 852 2699 2868
Longform Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
12
www.artesyn.com
File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005

▲Up To Search▲

Price & Availability of SMT05E-12V

	To Download SMT05E-12V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .